Description of Office Building Air Source Heat Pump Air Conditioning / Electric
Air To Air Heat Pump:
This air to water heat pump uses a variety of composite energy
pressure module hot water control systems, including air source
heat pump water heaters, solar collectors, electric heating pipes,
pressure module heating water tanks, first pressure module hot
water storage tanks and In the second pressure-bearing module hot
water storage tank, a circulation pipe and a return pipe are
connected through the air source heat pump water heater and the
pressure-bearing module heating water tank, and an air source
circulating water pump is installed in the middle of the
circulation pipe. By installing air source heat pump water heaters,
electric heating pipes and solar heat collection pipes in the
system, the three types of composite energy sources of air energy,
solar energy and electric energy can be combined into a heating
system. If there is a lot of hot water demand, the control system
can also use air energy, solar energy, and electricity to produce a
large amount of hot water at the same time. This system can not
only produce a large amount of hot water, but also has a good
energy-saving effect. It has a high degree of intelligence and can
adapt to different use needs and various environmental changes.
Application of air source heat pumps
Air Source Heat Pump Air Conditioning provide house heating and hot
water,wherever need hot water, energy saving and more economical,
not feel dry,it is widely use in hospital,sauna,factory,commercial
centre,slaughter, swimming pools, spas, etc
Why is air energy water heater better than solar energy?
Solar water heaters, as the name implies, rely on solar energy to
convert solar energy into heat energy, so that water rises from low
temperature to high temperature, so as to satisfy people's use of
water heaters. No noise, no pollution, no poisoning, reliable
installation, low-carbon environmental protection, non-toxic. Most
of the solar energy needs to use electric heating devices to make
up for the lack of lighting. The electric heating method is helpful
to ensure the temperature stability of the water, but there is a
danger of electric leakage. In summer, there is plenty of sunshine,
and the water temperature can easily reach the boiling point. If
you do not use water for a long time, the water tank is in a high
temperature and high pressure state, which will accelerate the loss
of equipment. In addition, solar energy is installed outdoors. It
is also possible to explode the tube. And because of its large size
and troublesome maintenance, it must be repaired by professionals.
Compared with solar energy, air energy water heaters give users a
better experience. Since the air-energy water heater only uses
electricity to drive the compressor, the water and electricity are
separated, and the heat is transferred through the cold medium.
Therefore, the water and electricity are completely separated,
there is no hidden danger of leakage, and the use is more assured.
Air-energy water heaters can achieve constant temperature hot
water, and air-energy water heaters can also provide users with
kitchen air-conditioning functions. In summer, when cooking in the
kitchen and turning on the air-conditioning mode, you will feel
fresh and comfortable.
Company introduction
Decades production experience, its own labotory, over 380patents,
norminated supplier for buildings, leader member for ediiting air
source heat pumps standard, about 80000pcs air to water heat pumps
production capacity a year!
Quality control:
100% inspection for each product, 3 phrases test before delivery,
free spares supply, good prize if found any unqualified items
Production line:
3 production lines to guarantee production capacity and quick
delivery, 2 shifts working
Technical paremeters of air to water heat pumps with instant hot
water
| Spec. | KFXRS-9I/CY |
| Nominal heating capacity at room temperature(kW) | 9.6 |
| Nominal input power at room temperature(kW) | 2.17 |
| Rated voltage(Hz) | 220V-50 |
| Low temperature heating(kW) | 7.8 |
| Low temperature input power(kW) | 2.15 |
| Maximum input power(kW) | 3 |
| Maximum current(A) | 16 |
| noisedb(A) | <55 |
| Anti-shock level | I |
| waterproof level | IPX4 |
| Caliber of outlet | DN20 |
| Unit size (mm) | 1010x350x835 |
| Unit Weight(kg) | 84 |
Nominal heating conditions at room temperature: environmental dry
bulb 20C, environmental wet bulb 15C, initial water temperature
15C, termination water temperature 5C. Low temperature heating
conditions: environmental dry bulb 7C, environmental wet bulb 6'C,
initial water temperature 15'C, stop water temperature 55C.
