The characteristics of high-temperature heat pump
High efficiency, low energy efficiency:
In extremely cold environments, compared to traditional
low-temperature air source heat pumps, the overall capacity
attenuation is smaller and the energy efficiency is higher.
The comprehensive energy attenuation rate shall not exceed 10%, and
the lower the ambient temperature, the higher the heating water
temperature, meeting the requirements of end of pipe thermal
matching.
Safe and stable:
Double stage compression technology, with dual compressors working
alternately, ensuring stable operating pressure and avoiding
overload.
Equipped with multiple self inspection and protection functions,
such as compressor exhaust temperature protection, system high and
low pressure protection, etc., to ensure the safe operation of the
system.
Low maintenance cost and long service life:
The equipment has a lifespan of 10-15 years, strong durability, and
low maintenance costs.
Designed with stainless steel sheet metal, it is heat-resistant,
corrosion-resistant, and not easily deformed.
Intelligence:
Equipped with 5G cloud technology, it supports remote monitoring,
fault diagnosis, and online maintenance to improve service
efficiency.
Intelligent zone defrosting reduces the impact of defrosting on
heating efficiency and ensures more stable water temperature.
| Type | FKH-110II/GW |
| Top out wind |
| Power specifications | 380V3N~50Hz |
|
Heating capacity under A1
operating condition(20) | 110kW |
|
Heating consumption power under
A1 working condition | 44.5kW |
|
Heating capacity under A2
working condition(7) | 105kW |
|
Heating consumption power under
A2 working condition | 48kW |
|
Heating capacity under A3
working cond ition (-12) | 90kW |
|
Heating consumption power
under A3 working condition | 52kW |
|
Heating capacity under A4working
condition(-20) | 80kW |
|
Heating consumption power
under A4 working condition | 49.6kW |
|
| Maximum operating current | 160A |
|
| Discharge | 18.9m³/h |
|
| Noise | ≤68dB(A) |
|
| Water side pressure loss | ≤85kPa |
|
| Unit size (ength x width x height mm) | 2260×1230×2170 |
|
| CONNECT SIZE | DN65(flange) |
|
| Unit weight (kg) | 1100 |
|
